- This is T-slot series.
- Platens consist with T-slot and screw holes.
- Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used
- All machines are available with proportional valve / variable pump / servo motor
- Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance
- Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS)
- Under normal condition, specifications and parameters may be improved without notification
- When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output
NEXEEN 260
SPECIFICATIONS
INJECTION UNIT |
UNIT |
A |
B |
C |
|---|---|---|---|---|
|
Screw Diameter |
mm |
50 |
55 |
60 |
|
Screw L/D Ratio |
24 |
22 |
20.3 |
|
|
Shot Size (Theoretical) |
cm³ |
592 |
704 |
826 |
|
Injection Weight (PS) |
GMS |
539 |
641 |
752 |
|
Injection Pressure |
Mpa |
202.3 |
170 |
144.9 |
|
Screw Speed |
rpm |
220 |
|
|
|
|
|
|
|---|---|---|---|---|
|
Clamp Tonnage |
KN |
|
2600 |
|
|
Toggle Stroke |
mm |
|
540 |
|
|
Tia Bar Diameter |
mm |
|
95 |
|
|
Space b/w Tie Bars |
mm |
|
570×570 |
|
|
Max. Mold Height |
mm |
|
600 |
|
|
Min Mold Height |
mm |
|
200 |
|
|
Ejector Stroke |
mm |
|
150 |
|
|
Ejector Tonnage |
KN |
|
70 |
|
|
Ejector Number |
Nos. |
|
5 |
|
OTHERS |
|
|
|
|
|---|---|---|---|---|
|
Max. Pump Pressure |
Mpa |
|
16 |
|
|
Pump Motor Power |
KW |
|
30 |
|
|
Heater Power |
KW |
|
19 |
|
|
Machine Dimension |
(L×W×H) m |
|
6.2×1.5×2.2 |
|
|
Machine Weight |
t |
|
8.3 |
|
|
Screw |
|
T-slot with screw holes |
||
|
Cylinder |
|
Double carriage |
||